Choosing the correct procedure library |
|
|
|
|
DataPA provide different procedure libraries with the DataPA installation to be used depending on which version of the Progress AppServer you are using. The different procedure libraries provide the same basic functionality for DataPA, but cater for the different compilation formats and data types required with each version of Progress. They are installed in the <INSTALLDIR>\ProgSrc directory. The table below describes which procedure library should be used with each AppServer version.
NB: Not all the procedure libraries were distributed with older versions of DataPA. If the version specified below is not available with your version, please raise a support ticket and our support team will create one for you.
|
AppServer Version |
32 bit |
64 bit |
|---|---|---|
9.1D |
datapa.pl |
N/A |
9.1E |
datapa.pl |
N/A |
10.0A |
datapa10.pl |
datapa10_64.pl |
10.0B |
datapa10.pl |
datapa10_64.pl |
10.1A |
datapa10.pl |
datapa10_64.pl |
10.1B |
datapa101B.pl |
datapa101B_64.pl |
10.1C |
datapa101B.pl |
datapa101B_64.pl |
10.2A |
datapa101B.pl |
datapa101B_64.pl |
10.2B |
datapa101B.pl |
datapa101B_64.pl |
11.0 |
datapa111.pl |
datapa111.pl |
11.1 |
datapa111.pl |
datapa111.pl |
11.2 |
datapa111.pl |
datapa111.pl |
11.3 |
datapa111.pl |
datapa111.pl |
11.4 |
datapa111.pl |
datapa111.pl |
11.5 |
datapa111.pl |
datapa111.pl |
11.6 |
datapa111.pl |
datapa111.pl |
| ||||